Click to enlarge
|
These moulded ABS housings are designed to accept our 95mm diameter rear lamps. The housings can be trimmed to an angle for mounting the lamps vertically on a sloping rear panel. Material thickness approximately 2mm. The cut edge can be trimmed with our #TRMU2 rubber ‘U’ channel and the whole assembly can be secured with long M4 fixings requiring drilling of only small holes in your bodywork.
CARBON FIBRE EFFECT LAMP HOUSINGS SINGLE#HOU1
120mm diameter x 65mm high
(shown above fitted with a red #RL17)
|
