If you want a closer look at any of our Kit Car Parts and Accessories come and see us at one of this years shows.
Detling Kit Car Motor Show
7th & 8th of April
Stoneleigh National Kit Car Show
6th & 7th of May
Newark Kit & Car Festival
16th & 17th of June
Donnington Kit Car Show
1st & 2nd of September
Exeter Kit & Car Builder Show
20th & 21st of October
| 0 item(s) in basket | ||
| Total:£0.00 |
| Currency Convertor: | ||
|
Ref. Code: PEDBOX2
Hydraulic clutch
Integral throttle pedal
£110.00
£132.00
inc. VAT


PEDAL BOX - HYDRAULIC CLUTCH WITH INTEGRAL THROTTLE PEDAL Here's a black powder-coated floor-mounted pedal box. Nicely made from 2.7mm and 5mm steel. The clutch pedal has a 6 to 1 ratio and the brake pedal has 4.75 to 1. Both brake and clutch pedals pivot on nylon bushes. The bottom half of the throttle pedal (below the pivot point) has a maximum of 50mm movement. No holes are made for throttle cable or it's connection to the pedal. Three 37mm holes for master cylinders. All of our standard, Integral Reservoir and Non-Reservoir cylinders will fit although the push rods may require shortening. The 26mm I.D. balance bar tube is cleverly offset towards one (front brakes) cylinder to 'pre-load' the front to back bias in favour of the front. No floor fixing holes are drilled. PEDAL BOX #PEDBOX2
NOTE: MASTER CYLINDERS, CLEVIS AND BALANCE BAR ARE NOT INCLUDED. SHOWN ONLY FOR ILLUSTRATION. |


| This product has no reviews added yet. |
|
|

